Providing Garage Door Lubrication Maintenance07/22/2014 Back To Blog
Why is lubrication maintenance so important for automatic garage doors? These systems use many metal parts which work to ensure proper opening and closing. For instance, it is a common misconception that the opener bears the weight of the door during the opening and closing cycle. The spring is responsible for this. Hence, this part needs to be lubricated properly in order to work normally. Find out what you will have to do to keep all metal garage door parts in good condition.
Providing Effective Lubrication
It is important to note that all metal parts have to be lubricated. These include all door parts plus the ones of the opener. If you have a chain drive or screw drive garage door opener, the chain or screw has to be treated as well.
Before you get to apply lubricant, you have to clean the metal parts. You have to ensure that rust is properly removed. For this, you will need to clean them with solvent first. The traditionally used products will do a fine job. You can also check out what the manufacturer of your door recommends. If there is stubborn rust, you can try applying a little but of kerosene with a small brush.
Once you are done with the cleaning, applying lubricant will be fairly simple. It is important for the parts to be covered with a thin layer. You should apply only small amounts of the product. They should be enough to cover the respective part. It pays off to apply small amounts of lube to all parts which are in contact with each other. You will benefit greatly from lubricating not only the garage door tracks, but the garage door rollers as well. That way, the list of the two parts rubbing against each other is reduced to the possible minimum.
With proper lubrication, the risk of damage will be effectively reduced.